Marine Paints, Marine parts and House paints at trade prices direct to public – Servicing the marine industry since 1914

Boat Care

Boat Care Boat Cleaning and Maintenance Products

A boat will need maintaining during the season to ensure it keeps its good appearance and sailing capabilities and the coating system is maintained.  How much maintenance and care is needed will depend on the environment in which the boat is sailed. Below is the selection of our Boatcare range of products.

Renew Rubbing Liquid – 500 ml

Renew Rubbing Liquid is a fine abrasive rubbing compound to remove oxidisation, stains and light scratch marks from most surfaces including aluminium. Restores and renews gloss and colour to gelcoat and painted surfaces. For manual and machine polishing

Application:
Clean surface with Pre-Clean or Boatcare Shampoo, rinse with fresh water and allow to dry.

Apply Renew Rubbing Liquid uniformly onto surface, rub with circular movements until almost dry. Droplets of water can be added onto the compound and surface to prevent drying. Wipe off with a clean cloth before product dries.

Shake well before use. Do not apply in direct sunlight. Finish with Clean & Polish or Custom Marine Polish followed by Wax & ProtectTecCel or Wax & Protect.
Minimum application temperature: 5ºC/40ºF.

Clean & Polish – 500 ml

Clean & Polish is a high performance liquid that quickly and easily cleans, polishes and protects in one application, leaving a high gloss finish. For use on Gelcoat, painted and varnished surfaces. Excellent for removing machine compound swirl marks.

Application:
Wash the surface with Pre-Clean or Boatcare Shampoo, rinse with fresh water and allow to dry. If a surface has deteriorated, use Renew Rubbing Liquid to restore gloss and colour. ApplyClean & Polish with a clean, soft cloth or polishing machine. Polish/wipe away any residue with a clean cloth.Shake well before use. Do not apply in direct sunlight. Allow freshly painted surfaces to dry for a minimum of 30 days before applying Clean & Polish.
For a high performance wax finish, use Wax & ProtectTecCelor Wax & Protect.
Minimum application temperature: 5ºC/40ºF.

Marine & General wash

A high quality wash that will not damage fiberglass, alloys, plastics, carbon fibre, canvas. Biodegradable, fast acting.