Marine Paints, Marine parts and House paints at trade prices direct to public – Servicing the marine industry since 1914

Decking Oils Paints

Pompei’s Marine has a number of options for decking oils and timber sealers. Firstly around the house have alook at the Crystal Deck oils and sealers. Then if your in a harsh environment or doing up your boat we have have the Norglass and Hempel range of Marine paints.

Crystal Decking Oils

This will give you a clear natural finish from $43.00 compare and save. This is a rich natural premium oil.

A range of colours is also available. Decking oil replaces the natural oils back into the bare timber lost through weathering. Clear turps based with no gloss finish at all. Washes up n mineral turps. Application on rough sawn timber is best by brush. Smooth timber can be rolled. If spraying, follow directly after with brush or roller while still wet. Can be used on interior or exterior surfaces. Drying and recoat time is best left for 24 hours, though dry exterior timber may be recoated sooner. The dryness of all timbers new and weathered can vary greatly. Before applying the first coat or recoating try a small test patch with a thin coat. Check to see that it soaks into the timber completely and does not leave a sticky surface. Coverage ranges from 12-20 square metres per litre depending on how dry the timber is.

Clear Wood Preservative 

This will give you a clear natural finish

A range of colours is also available. Clear wood preservative replaces the natural oils back into the bare timber lost through weathering. Clear turps based with no gloss finish at all. Washes up in mineral turps. Application on rough sawn timber is best by brush. Can be used on furniture. Smooth timber can be rolled. If spraying, follow directly after with brush or roller while still wet. Can be used on interior or exterior surfaces. Drying and recoat time is best left for 24 hours, though dry exterior timber may be recoated sooner. The dryness of all timbers new and weathered can vary greatly. Before applying the first coat or recoating try a small test patch with a thin coat. Check to see that it soaks into the timber completely and does not leave a sticky surface. Coverage ranges from 12-20 square metres per litre depending on how dry the timber is.

CLEAR TUFF TIMBER FINISH

Dries to a hard durable gloss finish

Can be painted on most timber surfaces tuff enough for use on flooring coverage on bare timber 5 ? 10 square metres per litre coverage on coated timber 10 ? 14 square metres per litre drying and recoat time is 1 to 3 hours can be brushed, rolled, or sprayed interior and sheltered exterior surfaces washes up in mineral turps available in 1 and 4 litre cans

Norglass Weatherfast Poly Clear

A tough single pack, abrasion resistant gloss coating with high levels of U.V inhibitors for interior and exterior use. for floors, furniture and marine applications. Also available in satin finish for interiors to produce a natural lustre. Contains a high level of UV screening agents making it suitable for inside / outside use. Recoat after 8 hours. Coverage up to 14 sq m/l.

Norglass Weatherfast Marine Varnish

A super high gloss finish with maximum levels of U/V inhibitors and stabilisers for areas of extreme exposure. for panelling, doors, hand rails and general varnish . Not suitable for floors or traffic surfaces. Coverage up to 12 sq m/l. Recoat after 16 hours.

Norglass Weatherfast Premium Timber Oil

A modified synthetic resin coating for feeding the timber where a natural grain appearance is desired. Contains U/V inhibitors for additional protection. Fast drying and does not leave a greasy film. Excellent penetration into open grained woods. For use on decks, floors and furniture. Coverage around 12 sq m/l.

Norglass Northane Clear Gloss

A two-pack, non-yellowing polyurethane withoutstandingchemical and abrasion resistance. Ideal for coating clear corrugated roof panels to seal leaks. May be used in continuously immersed conditions. Use on concrete trucks, earthmoving equipment, boats, aircraft, hospital walls and floors, fish ponds, and food surfaces. Good for all surfaces. Excellent heat resistance and durability makes this a premium clear coating. For use on floors, furniture, and exterior applications. A satin finish may be achieved by using Norglass Flattening Agent (interior use only). Can be used on any surface, extremely tough, water proof. Coverage upto 12 sq m/l. Re coat after 16 hrs. Comes in colors

Marine Varnish

Varnish will protect the wooden areas of your boat against the elements and enhance the natural beauty of the surface where the wood is of good quality.

Favourite Varnish

2.5l, 750ml & 375ml

  • Easy to use
  • Traditional
  • Multi-purpose
  • Full bodied
  • Excellent finish
A single pack, alkyd based, full bodied, high gloss varnish. Especially easy to use, giving a tough, durable finish with depth of gloss and longevity of life. Ideal for areas where structural flexibility of the wood is needed. Use inside and outside above the waterline.

Classic Varnish

2.5l, 750ml & 375ml

  • Traditional containing tung oil
  • Excellent flow
  • Full bodied
  • Uncompromising finish
A single pack, traditional varnish produced from the highest quality materials, including tung oil. Excellent flow at application, a flexible finish and long term UV filters will ensure you an uncompromising finish that will last for a long time. Use inside and outside above the waterline.

Dura-Gloss &  Dura-Satin Varnish

2.5l, 750ml & 375ml

  • Quick drying
  • Ideal for interior & exterior areas of high wear
  • Durable finish resistant to abrasion
  • Available in gloss and satin finishes
Dura-Gloss Varnish is a single pack, urethane modified alkyd with excellent resistance to alcohol and cleaning materials. Quick drying to an extremely hard and durable high gloss surface, which is highly resistant to wear and abrasion within hours of application – it ideal for inside and outside areas where the varnish needs to be beautiful and durable. Use inside and outside above the waterline.
Dura-Satin Varnish is a satin finish version for areas where a satin finish is required instead of high gloss.

Diamond Varnish

2.5l, 750ml & 375ml

  • Extremely durable
  • Long lasting
  • High UV protection
  • Ultimate finish
A two component polyurethane varnish for use where a hard, extremely durable and long lasting finish is required. Highly resistant to abrasion and chemicals, for the ultimate finish in durability and beauty. Use inside and outside above the waterline.

Weatherfast Marine Varnish

A super high gloss finish with maximum levels of U/V inhibitors and stabilisers for areas of extreme exposure. Ideal for panelling, doors, hand rails and general varnish work. Not suitable for floors or traffic surfaces